Disc
Golf Course Installation: DISCatcher® Installation
Interactive DISCatcher® installation tutorial
Tips for
Installation
These are some tips that will really help to make your installation
successful. MOST IMPORTANT!
Never dig holes without contacting the
local power, water, gas, sewer, and park maintenance companies
to check for buried lines.
Nothing will ruin your day like a broken gas main
or sewer line! Most of these companies will send
a surveyor out to check for any buried lines free of charge.
- Make sure
your target pipe is plumb. Use a level. The chain set and
its rings can be an indicator if no level is available.
- Remember
the lock tabs are to be set at or just below ground level.
With grass, the ground level are where the grass and soil meet.
- Make sure to leave enough room between the top pf the concrete
and the locking tabs so that the padlock can be accessed easily.
- Use rubber/vinyl clad locks that have been thoroughly lubricated
before installation.
- Align padlock tab back towards the tee to have hole number
decal face tee area.
- 60-80 pounds of concrete should be plenty to secure your target.
Remember, concrete and padlock are not included.
|
