1. 4" Minimum Thickness
2. 3000 PSI Minimum
3. 4" slump (recommended)
4. Approx. 1 cubic yard per each 12' x 6' x 4" tee pad.
5. Use rebar or wire when building on unstable soil.

1. Create a Very Coarse finish! Most broom finishes will wear smooth within one year and will be ineffective during wet conditions. To achieve an excellent finish, affix a weighted Astroturf mat to a broom and drag the mat across the wet concrete. Timing is essential to the finish. Drag the grass-like blades across the wet surface shortly after floating but before a broom finish would normally be applied.

2. Two inch finished edge (optional)

1. The tee pad should be essentially level from side to side.

2. From front to back, the pad may slope to follow grade, but slope must not exceed 1 inch per foot. To allow for drainage, the pad should never be perfectly level or have low areas that will harbor water.

3. Pad elevation should not interfere with mowing and other maintenance operations.